£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A two component, glass flake reinforced novolac vinyl ester coating for new or old steel with excellent resistance to high temps and solvents.
A two component, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subs...
Formerly Amercoat 340. A two component, abrasion resistant, solvent free, amine cured, phenolic epoxy coating.
A two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°...
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A two component flint reinforced solvent free polyamine cured, epoxy compound suitable for the protection of steel and concrete.
A 2 part surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.