NORSOK Approved Paints

A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

Formulated specifically to provide corrosion protection for the subsea market.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, high solids, high build, two component epoxy coating.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...