£9.95 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A 2 pack polyamine cured pure epoxy coating that can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed env...
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
A 2 pack fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
A 2 pack, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
Formulated as a cosmetic finish above water in marine environments. NORSOK approved.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A 2 pack chemically curing high gloss aliphatic acrylic polyurethane coating. Provides resistance to UV and chemicals.
A 1 pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A 2 pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail / Highways No. 185.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating. Blend of fused aluminium oxide.
A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A 2 pack, high build, amine adduct-cured novolac phenolic epoxy primer for subsequent coats of PPG Phenguard Subsea 780.
A 2 pack amine adduct cured phenolic epoxy finish. A finish coat within a system for the protection of subsea equipment.
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.