*Centrecoat Rapid Dry Gloss

SKU
id10102
***
This product is now discontinued.
Out of stock
Product Description

Please note, this product is now discontinued. Contact our technical team for a suitable alternative.

Centrecoat Rapid Dry Gloss is a single pack quick drying industrial top coat paint that is suitable for use on steel.

Best Uses

Centrecoat Rapid Dry Gloss is a single pack quick drying industrial paint formulated using xylene to produce an acrylic resin based topcoat that is suitable for use on both steel and concrete. Rapid Dry Gloss can be applied at low temperatures and will produce a smooth satin gloss finish when applied by spray but can also be applied to small areas by brush or roller.

  • Fast drying
  • Good exterior durability
  • Excellent Gloss and colour retention
  • VOC compliant as a finish

Application

Can be applied on most sound clean paint systems or onto clean bare metal which has been primed with a suitable primer. Application temperature range 5-30°C. Substrate temperature should be at least 3°C above dew point. Maximum relative humidity during application and curing is 85%.

Stir well before use. The temperature of the paint should preferably be above 15°C, otherwise extra thinner may be required to obtain application viscosity. Too much solvent results in reduced sag resistance. Adequate ventilation must be maintained during application and curing. Addition of thinner may increase the VOC value of the product to greater than 420g/l.

Apply using brush, roller, airless spray or air spray as per datasheet.

Technical Details

Notes

  • Offers good abrasion resistance
  • Good flexibility
  • Excellent water resistance
  • Good chemical resistance

Technical Info

Components: One Part
Type: Modified acrylic based, air drying industrial enamel
Finish: Gloss
Stock Colours: Just tints
Tintable: Yes, to a wide range of colours including RAL, BS 4800 and BS381C shades. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 420.0g per Litre
Volume Solids: 53%
Suitable Substrates: For metal surfaces primed with Centrecoat Rapid Dry Primer
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage:
  • 21.2m2 per litre for 25 microns
  • 3.3m2 per litre for 40 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 5 - 40 microns per coat
Induction Time: -
Pot Life: -
Touch Dry: 40 minutes at 20°C
Overcoatable: Between 5 - 24 hours at 20°C
Fully Cured: 1 day at 20°C
Cleaner / Thinner: PPG Thinner 21-06
Shelf Life: At least 12 months when stored cool and dry
Packaging: Available in 5 Litres