£7.75 delivery on orders excluding certain products & postcodes *
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.
A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A general purpose thinner designed to improve the flow of Jotun Tankguard paints.
A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.
A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.
A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.