Full Product Catalogue

Part of the Sikagard Anti Graffiti Coating System.

A solvent based, single pack primer for use on porous substrates and metals.

An epoxy adhesive for structural bonding and concrete repair. For DIY and Professional applications.

A thixotropic, 3-part patching and repair R4 rated mortar.

A ready to use (just add water) latex-modified smoothing and levelling compound for advanced flexibility and resilience for smoothing and levelling un...

A two-part, water-based, coloured epoxy resin floor coating with low emissions and low maintenance requirements.

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.

A single component, cold-applied, moisture-triggered polyurethane membrane. It cures to form a seamless, durable and weather- resistant waterproofing ...

A polyester fleece used as reinforcement with Sikalastic Liquid Applied Membrane systems.

Formerly Sikafloor 326. A two part solvent free, coloured self-smoothing PUR floor resin, with tough-elastic properties.

A 2-pack acrylic polyurethane ideally suited to all environments where both protective and decorative considerations are present.

A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.

A solvent-free, water dispersed floor primer based on epoxy resin.

A three part, epoxy modified cementitious, fine textured mortar for self smoothing floor screeds in thin layers of 1.5 to 3mm.

A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.

Polymer Modified Bentonite Waterproofing System. Self healing membrane for basement and below ground structures.

Easily moulded waterproofing paste for irregular detailing.

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives.

Single sided adhesive tape, Butyl Rubber based.

Galvanised steel fixing strip of membrane termination.

A solvent based, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete.

A multi-component, water based coloured polyurethane hybrid flooring screed.

A two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin.

A thixotropic, 2-component repair mortar, based on a combination of epoxy resins with refined quartz fillers.

A cementitious epoxy resin compensated 3-component coating used as bonding primer and reinforcement corrosion protection.

A moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar.

A cement based, fast setting, polymer modified one component repair mortar meeting the requirements of Class R4 of BS EN 1504-3.

A three part epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm.