£7.75 delivery on orders excluding certain products & postcodes *
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Selemix Aqua Direct Hardener 9-450 for use with Selemix range of 2 pack water based paints.
Formulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.
A single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.
Selemix Direct Hardener 9-120 for use with Selemix range of 2 pack paints.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.
A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...
An easy to apply topcoat with a high gloss finish and is ideal for the protection of ferrous steel and in particular plant and agricultural equipment....
Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.
Excellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.
Selemix Direct Hardener 9-060 for use with Selemix range of 2 pack paints.
Selemix Direct Hardener 9-080 for use with Selemix range of 2 pack paints.
An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
Provides a short flash-off between coats and prior baking in a short time for Selemix 8-110 Gloss and 8-111 Matt.
For use with Selemix Aqua range of 2 pack paints when painting large areas.
A compatible thinner for Selemix Direct, Selemix 7-510, Selemix 2.705.0502, Selemix 7-512 and Selemix 7-550 UHS Polyurethane Topcoat.
A compatible thinner for Selemix Direct, Selemix 7-110 and Selemix 7-510.