£7.75 delivery on orders excluding certain products & postcodes *
Full Product Catalogue
Shop By
Filter by
Filter by
- Manufacturer Selemix Remove This Item
-
Selemix 6-560 Fine Texture Aggregate Additive, 200gAdditive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
-
Selemix SPP6970 Electrostatic Aggregate Additive, 1 LitreAdditive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.
-
Selemix High Temp 350°C Resistant TopcoatA single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
-
Selemix High Temp 600°C Resistant Topcoat, Black, 4 KgA single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
-
Selemix 6-561 Coarse Texture Aggregate AdditiveAdditive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
-
Selemix Aqua 9-450 Direct Hardener, 5 LitresSelemix Aqua Direct Hardener 9-450 for use with Selemix range of 2 pack water based paints.
-
-
Selemix 7-550 2 Pack Polyurethane UHS TopcoatFormulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.
-
Selemix 7-820 1 Pack Synthetic Fast Dry Extra PrimerA single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.
-
Selemix 9-120 UHS Acrylic Fast HardenerSelemix Direct Hardener 9-120 for use with Selemix range of 2 pack paints.
-
Selemix Aqua 8-111 2K Single Stage Matt TopcoatA water based polyurethane coating which can be applied direct to suitably prepared steel.
-
Selemix Aqua 8-110 2K Single Stage Gloss TopcoatA water based polyurethane coating which can be applied direct to suitably prepared steel.
-
Selemix Aqua 8-450 2k Waterborne Epoxy PrimerThis Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
-
Selemix Aqua 8-863 1K Synthetic Gloss TopcoatBased on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.
-
Selemix Aqua 8-864 Synthetic Matt Hydro-Thinnable TopcoatA fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...
-
Selemix 7-630 1 Pack Synthetic Urethane TopcoatAn easy to apply topcoat with a high gloss finish and is ideal for the protection of ferrous steel and in particular plant and agricultural equipment....
-
Selemix 7-610 1 Pack Fast Dry Synthetic TopcoatExcellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.
-
Selemix 7-611 1 Pack Fast Dry Synthetic Matt TopcoatExcellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.
-
-
Selemix Direct 9-060 Extra PU HardenerSelemix Direct Hardener 9-060 for use with Selemix range of 2 pack paints.
-
Selemix Direct 9-080 Acrylic HardenerSelemix Direct Hardener 9-080 for use with Selemix range of 2 pack paints.
-
Selemix 4-040x 2 Pack High Build Epoxy PrimerAn easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
-
Selemix Aqua 9-125 Fast Curing HardenerProvides a short flash-off between coats and prior baking in a short time for Selemix 8-110 Gloss and 8-111 Matt.
-
-
Selemix Aqua 9-110 Direct HardenerFor use with Selemix Aqua range of 2 pack paints when painting large areas.
-
Selemix 1-208 Slow 2K PU ThinnerA compatible thinner for Selemix Direct, Selemix 7-510, Selemix 2.705.0502, Selemix 7-512 and Selemix 7-550 UHS Polyurethane Topcoat.
-
Selemix 1-470 Slow Direct 2K ThinnerA compatible thinner for Selemix Direct, Selemix 7-110 and Selemix 7-510.
-
