£7.75 delivery on orders excluding certain products & postcodes *
For use with Selemix range of 2 pack paints when painting large areas.
A high gloss, rapid drying finish for application to bare steel.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
Selemix degreaser for preparing substrates ready for Selemix primers and topcoat systems.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
Selemix System Glass Additive can be added to Selemix 2k paints when adhesion to glass is required.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
A single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.
Selemix Direct Hardener 9-120 for use with Selemix range of 2 pack paints.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
An easy to apply topcoat with a high gloss finish and is ideal for the protection of ferrous steel and in particular plant and agricultural equipment....
Excellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.