Full Product Catalogue

A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.

Single Pack One-Stage Semi-Gloss, apply directly to suitably prepared bare steel and old finishes, touch dry in 40-60 minutes.

A high gloss, rapid drying finish for application to bare steel.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.

Slow reactive thinner for use with Selemix Direct Pro 7-159.

Suitable thinner for use with Selemix Direct Pro 7-159.

Slow hardener for Selemix Direct Pro 7-159.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Selemix Direct Hardener 9-070 for use with Selemix Direct Topcoat..

A very high gloss, excellent colour fast and resistance to atmospheric attack product, available in RAL, BS 4800 or NCS Colours.

A single pack paint formulated with nitro-cellulose fast drying top coat designed for the protection of ferrous substrates.

Thinner suitable for acrylic paints in the Selemix range of products.

Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.

A single pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.

A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.

A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.

7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.

Thinner suitable for acrylic paints in the Selemix range of products.

Selemix Thinner 1-215 for use with Selemix paints.

Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.

Selemix thinner 1-400 has been specially blended for use with Selemix paints.

Selemix Thinner 1-610 for use with Selemix synthetic paints.

A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.

Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.

Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.

Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.

Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.