£7.75 delivery on orders excluding certain products & postcodes *
A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.
Single Pack One-Stage Semi-Gloss, apply directly to suitably prepared bare steel and old finishes, touch dry in 40-60 minutes.
A high gloss, rapid drying finish for application to bare steel.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Suitable thinner for use with Selemix Direct Pro 7-159.
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A very high gloss, excellent colour fast and resistance to atmospheric attack product, available in RAL, BS 4800 or NCS Colours.
A single pack paint formulated with nitro-cellulose fast drying top coat designed for the protection of ferrous substrates.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
A single pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.
A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.
Selemix thinner 1-400 has been specially blended for use with Selemix paints.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.
Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.