Full Product Catalogue

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A two component epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A functional coating for identification of hot spots and internal insulation failures.

A single component, water-based rust remover / cleaner gel for a range of substrates.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.