£9.95 delivery on orders excluding certain products & postcodes *
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.
Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
A fast drying solvent-based epoxy resin base. Contains rust inhibitive pigments to protect all metal surfaces.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.