£7.75 delivery on orders excluding certain products & postcodes *
Ideal for Corrugated Fibre Asbestos roofs to improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.
A solvent based HEAVY DUTY road line striping paint. Ideal for roads, runways and more.
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.
A solvent based, colourless, decorative and protective high resistance varnish inriched with polyurethane resins for interior wood.
A solvent based, long lasting, UV protecting, highly flexible woodstain suitable for old or damaged interior and exterior wood including cladding.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A solvent based wood treatment that protects external timbers against water ingress, fungal growth and UV damage.
A solvent based, deeply penetrative wood preserver which prevents rot, mould and decay, which is harmless when dry and water repellent.
Both a wood preserver and a woodworm killer that is water based and dries clear.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A solvent based semi-gloss internal floor coating which is resistant to mild chemicals, water, oil and grease.
A lead free universal rapid drying road marking paint suitable for application to asphalt, concrete and brick with good skid resistance.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.
Specifically developed line marking paint as a fast drying line marking coating for concrete surfaces with minimum disruption.
A two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistance, high solids, high build product.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.