£7.75 delivery on orders excluding certain products & postcodes *
Full Product Catalogue
Shop By
Filter by
Filter by
- Substrate Steel, Structural Remove This Item
-
International Interplus 4101 Clean GelA water-based rust remover which is 100% biological degradable and free from toxins.
-
International Interchar 2060cIntumescent coating for 60 minutes fire resistance to structural steelwork.
-
Jotun Resist 78A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
-
Jotun Penguard HSP ZPA two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
-
Jotun Penguard ProSpecially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.
-
Jotun Penguard Pro GFA two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
-
Jotun Penguard Express MIOA two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
-
Jotun Penguard ExpressA two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
-
Hempel Hempaxane Light 55030A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
-
Selemix High Temp 600°C Resistant Topcoat, Black, 4 KgA single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
-
Jotun Steelmaster 1200 WFA single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...
-
Jotun Pilot WF (Waterfine)A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
-
Centrecoat Zinc Phosphate Primer 580A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
-
Sherwin Williams Firetex FX1003 SB Intumescent Coating White 20 LitresA single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.
-
Sherwin Williams Firetex FX2003 Solvent Based Intumescent CoatingA single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
-
Sherwin Williams Firetex FX5062 WB IntumescentA water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
-
Sherwin Williams Firetex FX5120 WB Intumescent, White, 20 LitresA water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.
-
Jotun Barrier 80A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
-
Bollom Brosteel Ultra 60 Fire ProtectionBollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.
-
Owatrol Marine OilA rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
-
Sherwin Williams Kem-Kromik 530 - Formerly Leighs Acrolon C530A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
-
Sherwin Williams Zinc Clad IV EU Formerly M501An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
-
Sherwin Williams Envirolastic 2500Suitable for use in a range of markets where durable performance and aesthetics are needed.