Full Product Catalogue

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

For application to steel tank internals.

Wood-discolouring fungi resistant (Mould, Blue Stain). Protects against Mildew.

For dry indoor spaces such as interior walls and ceilings.

An elastic rubber water free cleaning paste for the removal of dust, soot, nicotine residue and other soiling on walls.

A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.

Formulated to decorate and protect the façade of a brick property.

A durable bitumen-based pothole patch repair for roads and paths.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A top quality bitumen liquid paint with flow agents and high grade filler that provides an 'as new' appearance.

A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

One component corrosion-inhibiting cement for the protection of reinforcing rods.

A two-component multi-purpose neutral-coloured epoxy formulate in water dispersion to create vapour-permeable coatings on industrial floors.

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressur...

For quick repair of fine crack and holes in warehouse, workshop and concrete floors.

A two pack epoxy resin oil tolerant primer.

Designed as a crack-bridging intermediate coat in combination with Sikagard® 550 W Elastic.

A one part clear siloxane water repellent for walls and absorbent cementitious substrates.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...

Designed to stay tacky to deter intruders, can be applied to walls, parapets, downpipes, gutters, window sills and fencing.

A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.