£9.95 delivery on orders excluding certain products & postcodes *
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.
Formulated to decorate and protect the façade of a brick property.
Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.
A Rapid Setting Pourable Grade repair for concrete floors, applied at thickness's from feather edge to 100mm.
A 2 pack solvent free amine cured phenolic/novolac epoxy. Specially designed tank lining with very good chemical resistance.
A solvent coating which resists alkalis and ageing on mineral substances including concrete and cementitious surfaces.
A biological stain remover for cleaning concrete driveways, block paving and other surfaces.
2 pack cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.
For internal or external renovation of concrete floors, holes, cracks and damages.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. Will treat up to 40m2.
Fast repair mortar for repairs in façade areas that are not statically or dynamically stressed.
Kit consists of a two part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
A two component coating for use in atmospheric and immersed environments.
Removes common construction and atmospheric staining from smooth architectural and engineered concrete.
A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.
A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.
A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin. Used as an epoxy primer, levelling mortar and mortar screed.
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.
A high opacity flat black acrylic coating for metal, wood, cement and masonry.