£9.95 delivery on orders excluding certain products & postcodes *
A single pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.
A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
A BBA certified low-maintenance, solvent based microporous, flexible opaque, preservative.
Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.
Selemix System Glass Additive can be added to Selemix 2k paints when adhesion to glass is required.
Selemix thinner 1-400 has been specially blended for use with Selemix paints.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.
Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
A waterborne paint made primarily of linseed oil suspended in water and can be mixed to produce a large variety of different colours.
Selemix Aqua Direct Hardener 9-450 for use with Selemix range of 2 pack water based paints.
Formulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.
A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...