£9.95 delivery on orders excluding certain products & postcodes *
A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.
Suitable for use as a finishing coat for protection of structural steel.
A water-borne two pack polyurethane clear varnish for overcoating Teknos Aqua 3393.
A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A highly cross-linked, two component, high build epoxy phenolic coating.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component epoxy polyamide shop primer, pigmented with zinc phosphate rust-inhibiting pigments.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.