£7.75 delivery on orders excluding certain products & postcodes *
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A single pack, solvent based special varnish suitable for interior and exterior woodwork.
A clear surface coating, available in a matt and gloss finish, offering excellent protection against graffiti and poster vandalism.
A high build, low odour, one coat primer / finish cladding paint formulated to protect profiled metal cladding and plastisol from the elements.
An economical one coat primer/finish. Quick drying with high sheen level.
A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.
A very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.
A general purpose anti-corrosive metal primer, giving a high build matt finish.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.
A quick drying alkyd primer, containing zinc phosphate to enhance it's anti-corrosion properties.