£9.95 delivery on orders excluding certain products & postcodes *
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A two component polyurethane paint with good gloss retention and colour stability.
A high zinc content primer with outstanding resistance to severe weathering.
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Suitable for use as a finishing coat for protection of structural steel.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.
Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.