Full Product Catalogue

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A two pack, semi gloss polyurethane coating for steel structures subject to weathering or chemical stress. LuL APR No.2940

Water based paint for use on either interior or exterior wood, window trims and metal.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A degreaser suitable for use on a range of different surfaces.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A 2K high build epoxy primer containing anticorrosive pigments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

For internal walls and ceilings where surfaces must be hygienic, easy to clean and resistant to abrasion.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A low VOC, high solids, high build, two component epoxy coating.

For the treatment of weld seams, lap joints & kerb angles.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

This product is now discontinued.