Full Product Catalogue

Metal Cladding Primer for Plastisol Cladding including Mobile Homes, Static Homes and Touring Caravans.

Metal Cladding Primer - Plastisol Cladding Paint Primer for use on Mobile Homes, Caravans and Industrial Units.

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.

A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.

A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.

Acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems.

A two component water borne epoxy coating for corrosion protection. Designed for where short dry to handle and over coating times are required.

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

A high spec, 2 pack, anti corrosion intermediate MIO coat for steel structures at risk from severe abrasion.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.