Full Product Catalogue

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.

A colourless, silane and siloxane-based water repellent impregnator in a watery emulsion.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two pack epoxy resin oil tolerant primer.

A very durable, solvent-based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film...

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to both positive and negative water pressure.

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.

A water based, 2 pack epoxy gloss finish for hygienic interior use on walls, floors and ceilings.

Formerly Liquid Plastics Sterimatt 206W. A hygienic waterborne modified acrylic resin surface coating with a matt finish.

A high performance epoxy system for application at temperatures down to 0°C.

Fast Setting for Deep Holes in Concrete and Power Floated Floors and slabs.

A slip resistant, long lasting paint for use on macadam and concrete tennis courts.

A solvent based high performance sealer which is suitable for heavily trafficked areas.

A water based cure and seal for improving the abrasion resistance of all forms of freshly laid or existing concrete.

A highly durable, low-odour coating, for areas that are subject to graffiti.

An exceptionally hard wearing, pre-aggregated, water-based anti-slip floor coating.

A hard wearing two-component water based epoxy floor paint and wall paint for interior use. NEW FORMULATION

A two component, non-isocyanate epoxy acrylic gloss topcoat finish.

An elastic joint filler based on water dispersed high polymers.

A Rapid Setting Pourable Grade repair for concrete floors, used inside or outside, applied at thickness's from feather edge to 100mm.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

A high crack bridging, anti carbonation, water repellent masonry paint for walls and Park Homes.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.