Full Product Catalogue

Thermoplastic Netball Court Kit for Playgrounds.

A fun way for kids to play at school and they have been specifically designed to be applied in school playgrounds nationwide.

A high build 2-pack polyamide cured epoxy zinc phosphate primer finish for use as an internal flow coating for pipelines.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.

A water based TCEP free, thin film intumescent coating providing protection for up to 120 minutes on structural steel.

A fast acting water based paint stripper designed to remove existing multi layered paint from walls and ceilings.

A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.

Water-based, single pack, fast drying acrylate exterior single coat paints for mineral masonry.

A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.

Fast drying intumescent coating for structural steel.

Part of the Sikagard Anti Graffiti Coating System.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A clear, water-borne, two pack polyurethane lacquer, resistant to yellowing. Ideal for interior woodwork.

High-performance 2K acrylic polyurethane clearcoats designed to achieve from very high gloss to very matt finish.

A 2K high build epoxy primer containing anticorrosive pigments.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

An epoxy powder coating particularly suitable for storage tanks for the water industry.

A highly elastic, thermoplastic rubber-based, single component exterior waterproofing coating for roofs.

An epoxy primer for use on roofs within an LRS FastCoat roof system.

A low gloss polyurethane topcoat for atmospheric environments.

A one component, waterborne acrylic zinc phosphate primer for use within a PPG system.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For the treatment of weld seams, lap joints & kerb angles.