Full Product Catalogue

A quick drying, gloss, brush applied container and skip metal paint.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A very low VOC, single pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires...

A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.

Fast drying intumescent coating for structural steel.

Single Pack Primer for Steel, Aluminium and Zinc surfaces.

A fast drying anti-corrosive primer for steel surfaces.

A two component polyurethane paint with good gloss retention and colour stability.

A high zinc content primer with outstanding resistance to severe weathering.

A solvent free coating designed for installation onto steel or concrete surfaces.

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

A low viscosity Primer/Saturant for steel and concrete.

A VOC compliant, single component, water based anti-corrosive primer/finish.

A single component, water based acrylic finish for use in industrial environments.

Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A water-based rust remover which is 100% biological degradable and free from toxins.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.

A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.