NORSOK Approved Paints

Suitable for use as a finishing coat for protection of structural steel.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

Formulated specifically to provide corrosion protection for the subsea market.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A universal epoxy and self-primed high performance coating system.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.