£7.75 delivery on orders excluding certain products & postcodes *
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.
Provides protection for bare or blasted metal and has maximum durability under severely corrosive conditions.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
A two component, metallic zinc primer for steel in aggressive environments.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.