£7.75 delivery on orders excluding certain products & postcodes *
Promain have a wide range of certified coatings for both internal tank linings and external works. Whether you are looking for coatings for the internals of grain and dry foodstuff silos or for storage of chemicals we have a range of approved products. Promain are proud to supply coatings suitable for use in the petrochemical industry for the transportation and storage of petrol, diesel, jet fuel, gasoline, crude oil and more. We also supply coatings for the inside of ballast tanks.
View our extensive selection of tank linings below from manufacturers including Sika, Sherwin Williams, PPG, International, Jotun and Hempel.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
A two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating.
An oleoresinous general purpose aluminium paint with good heat resistance and good light reflection.
A one pack, PU MIO sealer suitable for use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.
A one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products.
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
A high build, 2 pack modfied epoxy barrier primer that is hard wearing against abrasion with excellent resistance to immersion in salt and fresh water...
A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
A two-component, solvent-free, amine-cured modified phenolic epoxy tank coating suitable for aviation fuel.
A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
A two component, solvent-free, high build epoxy coating specifically developed for use in normal to moderately aggressive chemical environments.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
A two pack gas resistant waterproof coating for waterproofing and protecting concrete structures.
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.