£7.75 delivery on orders excluding certain products & postcodes *
Promain supply a high quality range of heavy duty industrial floor paints and coatings that are suitable for heavy commercial, industrial, and if needed, domestic use. These heavy duty coatings are used when painting warehouses, showrooms, corridors, car parks, store rooms, factory units, cold stores, garages, boiler rooms, as well as heavy traffic areas and clean room applications in the health and food industry.
The industrial floor paints and heavy duty coatings that Promain offer are industry leading products. We will only ever put our name to something that can stand the test of time, which is why we bring you such highly sought after products. We understand how important it is for you to be able to trust that your products are going to be completely effective. Because of this, we have brought you industrial floor paints from top brand names like PPG, Rustoleum, Sika, Blackfriar, Coo-Var, Remmers, Centrecoat and Jotun.
An economical, chemical resistant, three-part polyurethane coating. Formulated as a top coat for Centrecoat Armourcoat HF floor toppings
A two pack epoxy varnish with good penetration properties, for use in cold climates.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.
Formerly Resutop Clear / Resucoat HB. A two-pack solvent-free high-performance clear floor coating for industrial floors.
A ready to use (just add water) latex-modified smoothing and levelling compound for advanced flexibility and resilience for smoothing and levelling un...
A seamless, medium duty epoxy floor topping for use on concrete and polymer modified cementitious screeds.
Formerly Spencer Coatings. A two pack epoxy, solvent free clear primer / sealer for concrete floors.
A two pack, fast curing flexible coating for tarmac or asphalt surfaces such as balconies.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.
A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.
A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.
A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.
Provides a tough, hard wearing coating for medium duty traffic giving high film build and wear resistance.
Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.
A 2 pack, heavy duty floor paint for garages, workshops and warehouses. FeRFA Type 3 System.
A 2 part epoxy, high build, slightly textured, fast curing floor coating and seal coat. Ideal for workshops and garages.
A two part flexible polyurethane floor coating with a gloss finish, suitable for medium duty traffic with occasional fork lift use.
An epoxy novolac coating designed to provide protection to concrete and steel structures in aggressive chemical conditions.
Formerly Sikafloor 264. A two part, economic, coloured industrial epoxy resin floor paint for maintenance workshops, garages and loading ramps.
A 2 part, solvent free, self levelling coating for floors such as mechanically loaded surfaces subject to foot and vehicle traffic.
High quality, silk gloss, water based, epoxy resin floor paint.
A matt, transparent sealer for use as a slip resistant topcoat for Remmers synthetic floor coatings.
Two-component water-based epoxy coating with a shiny finish, for concrete floors and cementitious substrates, to provide an anti-dust, oil resistant f...