Full Product Catalogue

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.

A solvent based thinner for acrylic and chlorinated rubber paints and anti-fouling compositions.

Designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics.

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A single pack, water borne acrylic emulsion topcoat for use over Jotun intumescent systems.

A low gloss polyurethane topcoat for atmospheric environments.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A general purpose thinner designed to improve the flow of Jotun Tankguard paints.

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

A two component transparent polyamide cured high molecular weight epoxy sealer coating for concrete.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.