Full Product Catalogue

Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.

A high performance renovating cleaner for removing algae growth from porous hard ground surfaces such as patios.

A heavy duty general purpose hard surface maintenance cleaner.

A versatile, effective, solvent based graffiti remover for delicate surfaces that are painted or non painted.

A biodegradable heavy duty cleaner and degreaser designed to remove heavy contamination from porous and hard substrates.

A water based crystallization product formulated to block moisture transmission in concrete and masonry structures.

Designed to remove rust stains from delicate surfaces, when other rust removers cannot be used due to their corrosive nature.

Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

Propane gas torches for use with thermoplastic line marking and thermoplastic signs.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.