£7.75 delivery on orders excluding certain products & postcodes *
A 2 pack polyurethane topcoat is formulated with enamel and will provide a high opacity, high gloss finish.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.
Selemix System Glass Additive can be added to Selemix 2k paints when adhesion to glass is required.
Selemix thinner 1-400 has been specially blended for use with Selemix paints.
A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.
Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.
Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.
A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
Combine to any compatible Selemix topcoat to improve water repellence, dirt pick up and graffiti resistance.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Selemix Aqua Direct Hardener 9-450 for use with Selemix range of 2 pack water based paints.
Formulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.
A single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.
Selemix Direct Hardener 9-120 for use with Selemix range of 2 pack paints.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.