Full Product Catalogue

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, high solids low VOC epoxy micaceous iron oxide.

Suitable for use as a finishing coat for protection of structural steel.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

Sigma AquaCover 400 two component polyamine cured water borne epoxy coating for steel and concrete.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A high build polyamide cured recoatable epoxy coating.

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A one component solvent based acrylic thin film intumescent coating.

Waterborne intumescent coating for fire protection of structural steelwork.

A high build quick air-drying oxide primer for use on ferrous metals.

A two component epoxy mastic coating for repair and maintenance.

Suitable for use in a range of markets where durable performance and aesthetics are needed.