Full Product Catalogue

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A quick-drying alkyd primer containing zinc phosphate. Ideal for the protection of steel.

Single pack, cold galvanizing, zinc rich sacrificial primer for steel.

A 2K high build epoxy primer containing anticorrosive pigments.

An anti-corrosive primer/finish for the Agricultural, Construction and Earth moving equipment sector.

A general purpose high gloss finish for Structural Steel.

An exterior scrim free intumescent coating for up to 120 minutes fire protection.

An epoxy powder coating particularly suitable for storage tanks for the water industry.

Solvent based primer and topcoat for ultimate corrosion protection in low temperatures.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

A versatile quick drying, single pack anti-corrosive primer for steel.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.