Full Product Catalogue

Suitable for use in a range of markets where durable performance and aesthetics are needed.

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration.

2 pack high solids, high build, polyamide cured epoxy for general purpose protection to steel and concrete structures.

A high performance 2 pack single coat shop applied protective finish for structural steel that will not normally require further site coats.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A 1 part physically drying water borne acrylic coating. A shop primer designed for high welding and cutting speed.

A 1 pack waterborne acrylic thin film intumescent coating. For structural steel exposed to cellluosic fire up to 120 minutes.

A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).

2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.

A very low VOC, 1 pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

A one component waterborne acrylic thin film 90 minute intumescent coating.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.