£7.75 delivery on orders excluding certain products & postcodes *
A cruiser grade ablative antifouling paint suitable for vessels with a maximum speed of 25-30 knots.
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.
A high performance epoxy system for application at temperatures down to 0°C.
An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.
A white, non-yellowing, paint that offers a dead matt finish over water-stained ceilings / walls.
Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.
Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...
A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.
A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.
A versatile quick drying, single pack anti-corrosive primer for steel.
A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...
A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.
An industrial detergent used for degreasing oily or soiled surfaces prior to painting.
A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.
A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.