Full Product Catalogue

A cruiser grade ablative antifouling paint suitable for vessels with a maximum speed of 25-30 knots.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high performance epoxy system for application at temperatures down to 0°C.

An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.

A white, non-yellowing, paint that offers a dead matt finish over water-stained ceilings / walls.

Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.

Formulated for application to new, bare steel, blasted steel or galvanized steel surfaces to provide a clear finish. Copper, chrome, silver, bronze, n...

A high build anti corrosive protection for steel and galvanised steel structures, including fences, galvanised ducts/cladding etc.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

A versatile quick drying, single pack anti-corrosive primer for steel.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.