Full Product Catalogue

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

A 2 pack epoxy which provides a protective coating to newly constructed, metal substrates, within atmospheric environments.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A universal rapid drying road marking paint. For application to asphalt, concrete and brick with good skid resistance.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

Specifically developed line marking paint - a fast drying line marking for concrete surfaces with minimum disruption.

A 2 pack polyamine cured epoxy mastic coating. A surface tolerant, abrasion resistance, high solids, high build product.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.

A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).

An interior paint, for use on blackboards found on walls. Formulated to allow for easy writing and easy cleaning.

A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

An ideal universal primer or single coat topcoat for steel, zinc or aluminium subject to severe abrasion or chemical stresses.

2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.

A solvent based HEAVY DUTY road line striping paint. Ideal for roads, runways and more.

A solvent based UV resistant long lasting saturating wood oil for interior and exterior wood.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high solids, high build, two component epoxy coating.

Varnish spray for added protection of Ampere Traffic Paint.