£9.95 delivery on orders excluding certain products & postcodes *
A Rapid Setting Pourable Grade repair for concrete floors, applied at thickness's from feather edge to 100mm.
A 2 pack solvent free amine cured phenolic/novolac epoxy. Specially designed tank lining with very good chemical resistance.
2 pack cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools.
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. Will treat up to 40m2.
A 2-part, low odour, low viscosity, multi-purpose epoxy resin. Used as an epoxy primer, levelling mortar and mortar screed.
An epoxy adhesive ideal for bonding a wide range of building materials to one another.
A 1 pack, water based, crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures.
A biodegradable heavy-duty cleaner and degreaser. Removes heavy contamination from porous and hard substrates.
Suitable for most exterior surfaces such as new or previously painted wood, uPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, sto...
A top quality bitumen liquid paint with flow agents and high grade filler that provides an 'as new' appearance.
Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.
A biological stain remover for cleaning concrete driveways, block paving and other surfaces.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
A single pack, solvent borne, acrylic resin based, thermoplastic primer for concrete and block paving.
Propane gas torches for use with thermoplastic line marking and thermoplastic signs.
A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.
For internal or external renovation of concrete floors, holes, cracks and damages.
A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete – class R3.
A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.
A flowable, quick setting cementitious mortar suitable for application down to temperatures as low as -5°C.
The ULTIMATE paint solution for rejuvenating tired driveways, patios and floors! Costs less than £1 per m2 per coat!
A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.
A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.
A hard wearing two-component water based epoxy floor paint and wall paint for interior use.
A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.
A high performance epoxy system for application at temperatures down to 0°C.