Full Product Catalogue

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

An economical paint solution for the refurbishment of skips and containers.

A high build, low odour, one coat primer / finish cladding paint formulated to protect profiled metal cladding and plastisol from the elements.

An economical one coat primer/finish. Quick drying with high sheen level.

A general purpose anti-corrosive metal primer, giving a high build matt finish.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.

A two-component, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

For wood, GRP, steel and ferro-cement yachts and motor boats, used on all interior surfaces to provide a protective finish.

A heat resistant aluminium pigmented polysiloxane paint for the protection of hot pipelines up to 600°C.

A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110

For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.

A quick drying, tough, flexible paint designed for use on metal surfaces.

Teamac Metalastic Paint for Wooden and Metal Barns, Sheds and Farm Buildings, Water Tanks and Gutters.