£9.95 delivery on orders excluding certain products & postcodes *
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
Helps to provide good adhesion properties to smooth, dense power floated floors as well as galvanised steel and aluminium.
A quick to apply and cost effective method to create a clear zone near fire exits.
A hand held applicator use for applying MMA paints and hot Thermoplastic material.
Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.
A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...
A low viscosity alkali resistant solution for the binding or stabilising friable or highly porous masonry or concrete floor surfaces.
Zinga EP Thinner HS is the recommended thinning solution for Zingaceram HS.
A solvent based intumescent mastic coating used for the repair of small areas of mechanical damage to Sherwin Williams Firetex range of intumescent co...
A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.
Suitable for most exterior surfaces such as new or previously painted wood, uPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, sto...
Water based Line Marking Paint for Asphalt, Tarmac and Concrete parking bays, EV charging, centre lines and edge lines, symbols and walkways.
A 1 part, cementitious, fibre reinforced, low shrinkage repair mortar from Sika.
A one component R3 cement based polymer modified high build repair and reprofiling mortar.
A bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials.
Designed for dark wood species to highlight the grain with modern colour highlighting such as gold and silver.
For garage floors, workshop floors, factory floors etc. Externally on paths drives and patio paving slabs.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A first-class, ultra covering, highly yielding and healthy sol-silicate one coat interior paint that is fast, safe, easy to use and is ideal for ceili...
A concentrated grass line marking paint for use with transfer wheel to wheel line marking machines.
A quick drying, gloss, brush applied container and skip metal paint.
An acrylic primer for use with the Tikkurila Luja hygiene paint system. LUL Registered No.2447
An alkaline cleaning and pre-treating detergent for use on interior and exterior surfaces prior to painting.
A high build epoxy paint suited for application at low temperatures.
A two pack epoxy varnish with good penetration properties, for use in cold climates.