Full Product Catalogue

A high gloss coach enamel available in historic colours.

A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).

A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.

A single pack, shop applied, quick drying, acrylic modified, anti corrosive protective gloss finish for use on internal and external structural steel....

A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.

A one part physically drying water borne acrylic coating, formulated as a shop primer designed for high welding and cutting speed.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...

A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.

A white spirit based, single pack quick drying primer for the protection of metal against corrosion.

A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.

A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.

A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.

A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.

Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.

A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

A one component waterborne acrylic thin film 90 minute intumescent coating.

A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.