£9.95 delivery on orders excluding certain products & postcodes *
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.
Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.
A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
A quick drying, gloss, brush applied container and skip metal paint.
A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.
A VOC compliant, single component, water based anti-corrosive primer/finish.
Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A water-based rust remover which is 100% biological degradable and free from toxins.
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A high gloss coach enamel available in historic colours.
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A single pack, high quality alkyd gloss finish for interior and exterior equipment and structural steelwork.
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.