£9.95 delivery on orders excluding certain products & postcodes *
A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.
A single component waterborne acrylic thin film intumescent coating for use to provide fire protection of structural steel exposed to cellluosic fire ...
A tintable single component waterborne acrylic fast drying emulsion coating for both interior and exterior use.
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
A single pack, thin film 120 minutes intumescent coating designed for site application via airless spray onto structural steel.
A single pack thin film 120 minute intumescent coating designed for in shop application to structural steel.
A water based TCEO free, thin film intumescent coating for up to 90 minutes fire protection on structural steel.
A water based CEP free thin film intumescent coating to provide fire resistance up to 120 minutes on structural steel.
Bollom Brosteel Ultra 60 intumescent paint fire proof paint for steelwork. Provides up to 60 minutes resistance.
A rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.
A quick drying, gloss, brush applied container and skip metal paint.
A very low VOC, single pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires...
A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.
A VOC compliant, single component, water based anti-corrosive primer/finish.
A single component, water based acrylic finish for use in industrial environments.
Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A water-based rust remover which is 100% biological degradable and free from toxins.
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A high gloss coach enamel available in historic colours.