Full Product Catalogue

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A two component epoxy mastic coating for repair and maintenance.

Suitable for use in a range of markets where durable performance and aesthetics are needed.

2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.

A two component polyurethane paint with good gloss retention and colour stability.

A high zinc content primer with outstanding resistance to severe weathering.

A solvent free coating designed for installation onto steel or concrete surfaces.

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

A low viscosity Primer/Saturant for steel and concrete.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.