Full Product Catalogue

A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

Two pack polyamide cured, zinc rich coating suitable for structural steel and piping exposed in corrosivity categories up to C5.

A two component polyurethane paint with good gloss retention and colour stability.

A high zinc content primer with outstanding resistance to severe weathering.

A solvent free coating designed for installation onto steel or concrete surfaces.

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

A low viscosity Primer/Saturant for steel and concrete.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.