Full Product Catalogue

A high build solvent free epoxy offering a smooth tile like finish, excellent protection against solvents and oils.

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.

A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approved Item No.112

Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

A high performance epoxy system for application at temperatures down to 0°C.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Anti corrosion system designed to withstand severe conditions and high temperatures up to 600° C.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A two component, metallic zinc primer for steel in aggressive environments.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.