Full Product Catalogue

An economical, chemical resistant, three-part polyurethane coating. Formulated as a top coat for Centrecoat Armourcoat HF floor toppings

A 2 pack, fast curing, clear sealer used as the finish coat for other flooring products in the MMA Fire Rated range.

A hard, angular aggregate mineral for use in Centrecoat slip resistant flooring and decking systems.

A specially graded quartz aggregate blend including gliding agent for Remmers flooring systems.

A slip resistant, silk matt sealant for use within Remmers flooring systems subject to light mechanical loads.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack, heavy duty floor paint for garages, workshops and warehouses. FeRFA Type 3 System.

A water based transverse conducting layer for Remmers Electro Static dissipative flooring systems.

A self levelling coating for electro static dissipative floor areas. Suitable for use within Remmers ESD systems.

An electro conductive, chemically resistant, crack bridging coating for use within electro static conductive systems by Remmers.

Formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.

A 2 pack moisture tolerant floor coating. FeRFA Type 3.

A long lasting, cost effective alternative to timber and steel decking in marine environments where slip risks are high.

A 2 part, solvent free, self levelling coating for floors such as mechanically loaded surfaces subject to foot and vehicle traffic.

High quality, silk gloss, water based, epoxy resin floor paint.

Special primer for matt damp substrates based on a transparent epoxy resin.

A very fast reacting transparent binder for blind coatings that can full cure down to 0°C.

A matt, transparent sealer for use as a slip resistant topcoat for Remmers synthetic floor coatings.

A transparent priming and mortar resin floor primer for use within the Remmers OS 8 System.

A two component, PUR matt, coloured seal coat which is designed to provide a finishing coat as part of the ComfortFloor flooring systems.

A colourless, water based, abrasion and solvent resistant anti-grafitti varnish.

A self adhesive tape suitable for application within Remmers anti static and electro conductive floor systems.

A system component of Remmers ESD and Electro Static Floor Systems to provide earthing points within the flooring layers.