£9.95 delivery on orders excluding certain products & postcodes *
Jotun saw an enormous increase in the size of the whaling fleet at the turn of the century and realized the potential in producing the marine coating he was selling himself, Gleditsch purchased an oil mill that was struggling and set about turning it into a paint manufacturing plant. In 1931 Jotun purchased Arcanol, a paint company that were producing a red lead based paint that offered extremely good rust-inhibiting properties, this paint coating proved to be the first real success for Jotun in the rapidly growing marine protective coatings industry. Jotun soon formulated an antifouling which meant that boats and ships were able to spend longer at sea before the necessity for cleaning in dry dock, this was typically up to four years.
Specially designed as a universal, all round, all year, new building coating where fast dry to handle is required.
A 2 pack polyamine cured pure epoxy coating that can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed env...
For exterior and interior marine areas, including outside hulls, superstructures, decks and water ballast tanks as an outfitting primer.
A fast drying, 2 part amine cured epoxy zinc phosphate pigmented coating. For exposed structural steel.
A 2 pack chemically curing high gloss aliphatic acrylic polyurethane coating. Provides resistance to UV and chemicals.
Formally Jotun Penguard Tie Coat. A 2 pack, polyamide cured, high molecular weight epoxy coating.
A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A 1 pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved No.169.
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved No. 111.
A 2 pack surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A 2 pack polyamide cured vinyl epoxy based coating. Formulated as a tie coat between epoxy primers and anti-fouling systems.
A 2 pack acrylic coating, formulated as a topcoat in pre-qualified NORSOK systems and offshore environments.